Denied
« back to search results

TAW-92614  /  Oregon Metallurgical Corporation (Albany, OR)

Petitioner Type: State
Impact Date:
Filed Date: 02/07/2017
Most Recent Update: 01/02/2018
Determination Date: 01/02/2018
Expiration Date:

DEPARTMENT OF LABOR

Employment and Training Administration

TA-W-92,614

OREGON METALLURGICAL CORPORATION
ATI SPECIALTY ALLOYS AND COMPONENTS
ALBANY OPERATIONS, 34TH AVENUE DIVISION
A WHOLLY-OWNED INDIRECT SUBSIDIARY OF
ALLEGHENY TECHNOLOGIES INCORPORATED
INCLUDING WORKERS WHOSE WAGES ARE REPORTED UNDER
TDY INDUSTRIES LLC
ALBANY, OREGON

Negative Determination Regarding Eligibility
To Apply for Worker Adjustment Assistance

In accordance with Section 223 of the Trade Act of 1974, as
amended ("Act"), 19 U.S.C. § 2273, the Department of Labor
herein presents the results of an investigation regarding
certification of eligibility to apply for worker adjustment
assistance.
Workers of a firm may be eligible for worker adjustment
assistance if they satisfy the criteria of subsection (a), (b)
or (e) of Section 222 of the Act, 19 U.S.C. § 2272(a), (b) and
(e). For the Department of Labor to issue a certification for
workers under Section 222(a) of the Act, 19 U.S.C. § 2272(a),
the following criteria must be met:
(1) The first criterion (set forth in Section 222(a)(1) of the
Act, 19 U.S.C. § 2272(a)(1)) requires that a significant
number or proportion of the workers in the workers' firm
must have become totally or partially separated or be
threatened with total or partial separation.

(2) The second criterion (set forth in Section 222(a)(2) of the
Act, 19 U.S.C. § 2272(a)(2)) may be satisfied in one of two
ways:
(A) Increased Imports Path:
(i) sales or production, or both, at the workers' firm
must have decreased absolutely; AND
(ii) (I) imports of articles or services like or directly
competitive with articles or services produced or
supplied by the workers' firm have increased, OR
(II)(aa) imports of articles like or directly
competitive with articles into which the
component part produced by the workers' firm was
directly incorporated have increased; OR
(II)(bb) imports of articles like or directly
competitive with articles which are produced
directly using the services supplied by the
workers' firm have increased; OR
(III) imports of articles directly incorporating
component parts not produced in the U.S. that are
like or directly competitive with the article
into which the component part produced by the
workers' firm was directly incorporated have
increased; AND
(iii) the increase in imports described in clause (ii)
contributed importantly to such workers' separation
or threat of separation and to the decline in the
sales or production of such firm.

(B) Shift in Production or Supply Path:
(i)(I) there has been a shift by the workers' firm to a
foreign country in the production of articles or
supply of services like or directly competitive with
those produced/supplied by the workers' firm; OR
(II) there has been an acquisition from a foreign
country by the workers' firm of articles/services that
are like or directly competitive with those
produced/supplied by the workers' firm; and
(ii) the shift described in clause (i)(I) or the
acquisition of articles or services described in
clause (i)(II) contributed importantly to such
workers' separation or threat of separation.

For the Department to issue a secondary worker
certification under Section 222(b) of the Act, 19 U.S.C. §
2272(b), to workers of a Supplier or a Downstream Producer, the
following criteria must be met:
(1) a significant number or proportion of the workers in
the workers' firm or an appropriate subdivision of the
firm have become totally or partially separated, or
are threatened to become totally or partially
separated;

(2) the workers' firm is a Supplier or Downstream Producer
to a firm that employed a group of workers who
received a certification of eligibility under Section
222(a) of the Act, 19 U.S.C. § 2272(a), and such
supply or production is related to the article or
service that was the basis for such certification; and

(3) either
(A) the workers' firm is a supplier and the component
parts it supplied to the firm described in paragraph
(2) accounted for at least 20 percent of the
production or sales of the workers' firm;
or
(B) a loss of business by the workers' firm with the
firm described in paragraph (2) contributed
importantly to the workers' separation or threat of
separation.

Section 222(c) of the Act, 19 U.S.C. § 2272(c), defines the
terms "Supplier" and "Downstream Producer."
Workers of a firm may also be considered eligible if they
are publicly identified by name by the International Trade
Commission as a member of a domestic industry in an
investigation resulting in a category of determination that is
listed in Section 222(e) of the Act, 19 U.S.C. § 2272(e).
The group eligibility requirements for workers of a firm
under Section 222(e) of the Act, 19 U.S.C. § 2272(e), can be
satisfied if the following criteria are met:
(1) the workers' firm is publicly identified by name by
the International Trade Commission as a member of a
domestic industry in an investigation resulting in--
(A) an affirmative determination of serious injury or
threat thereof under section 202(b)(1);
(B) an affirmative determination of market disruption
or threat thereof under section 421(b)(1); or
(C) an affirmative final determination of material
injury or threat thereof under section
705(b)(1)(A) or 735(b)(1)(A) of the Tariff Act of
1930 (19 U.S.C. 1671d(b)(1)(A) and
1673d(b)(1)(A));

(2) the petition is filed during the 1-year period
beginning on the date on which--
(A) a summary of the report submitted to the
President by the International Trade Commission
under section 202(f)(1) with respect to the
affirmative determination described in paragraph
(1)(A) is published in the Federal Register under
section 202(f)(3); or
(B) notice of an affirmative determination described
in subparagraph (1) is published in the Federal
Register; and

(3) the workers have become totally or partially
separated from the workers' firm within--
(A) the 1-year period described in paragraph (2); or
(B) notwithstanding section 223(b), the 1-year
period preceding the 1-year period described in
paragraph (2).

The investigation was initiated in response to a petition
filed on February 7, 2017 by a state workforce office on behalf
of workers of Oregon Metallurgical Corporation, ATI Specialty
Alloys and Components, Albany Operations, 34th Avenue
division, a wholly-owned indirect subsidiary of Allegheny
Technologies Incorporated, including workers whose wages are
reported under TDY Industries LLC, Albany, Oregon ("Oregon
Metallurgical Corporation"). The workers' firm is engaged in
activities related to the production of titanium ingot and mill
products.
The petitioner alleged, "Company is currently certified
under #85697 which expires 3/11/17. They have shut down 1
department and will close the casting department mid-May,
laying off approximately 18 affected workers. The company
continues to be hard hit by foreign competition of imports.
There is an increase in titanium imports from Russia and an
increase in Zinc imports from China."
During the course of the investigation, information was
collected from the workers' firm, the petitioner, the United
States Geological Survey (USGS).
With respect to Section 222(a)(2)(A)(ii) of the Act, the
investigation revealed that Oregon Metallurgical Corporation
did not increase imports of titanium ingot or mill products or
like or directly competitive with the titanium ingot and mill
products produced by the subject worker group in 2015 to 2016.
Additionally, aggregate U.S. imports did not increase while
aggregate U.S. production decreased during the aforementioned
period. Production of titanium ingots and mills products
increased aggregately and respectively from 2015 to 2016.
Import impact by way of zinc was not looked into as the worker
group is not engaged in activities related to the production
of zinc nor was zinc considered as a substitute, or in direct
competition with, titanium ingots or mill products.
With respect to Section 222(a)(2)(B) of the Act, the
investigation revealed that the firm did not shift the
production of titanium ingot or mill products or a like or
directly competitive article to a foreign country or acquire
titanium ingot or mill products or a like or directly
competitive article from a foreign country.
With respect to Section 222(b)(2) of the Act, the
investigation revealed that Oregon Metallurgical Corporation
is not a Supplier to a firm that employed a group of workers who
received a certification of eligibility under Section 222(a) of
the Act, 19 U.S.C. § 2272(a).
With respect to Section 222(b)(2) of the Act, the
investigation revealed that Oregon Metallurgical Corporation
does not act as a Downstream Producer to a firm that employed a
group of workers who received a certification of eligibility
under Section 222(a) of the Act, 19 U.S.C. § 2272(a).
Finally, the group eligibility requirements under Section
222(e) of the Act, have not been satisfied either because
Criterion (1) has not been met since the workers' firm has not
been publicly identified by name by the International Trade
Commission as a member of a domestic industry in an
investigation resulting in an affirmative finding of serious
injury, market disruption, or material injury, or threat
thereof.
Conclusion
After careful review of the facts obtained in the
investigation, I determine that the requirements of Section 222
of the Act, 19 U.S.C. § 2272, have not been met and, therefore,
deny the petition for group eligibility of Oregon Metallurgical
Corporation, ATI Specialty Alloys and Components, Albany
Operations, 34th Avenue division, a wholly-owned indirect
subsidiary of Allegheny Technologies Incorporated, including
workers whose wages are reported under TDY Industries LLC,
Albany, Oregon engaged in activities related to the production
of titanium ingot and mill products to apply for adjustment
assistance, in accordance with Section 223 of the Act, 19 U.S.C.
§ 2273.
Signed in Washington, D.C. this 2nd day of January 2018.

/s/Hope D. Kinglock
______________________________
HOPE D. KINGLOCK
Certifying Officer, Office of
Trade Adjustment Assistance