Petitioner Type: State
Impact Date:
Filed Date: 10/09/2014
Most Recent Update: 01/29/2016
Determination Date: 12/05/2014
Expiration Date:
Employment and Training Administration
TA-W-85,583
METALFAB TOOL & MACHINE, INC.
MIO, MICHIGAN
Notice of Negative Determination
After Statutory Reconsideration
As required by the Trade Adjustment Assistance Reauthorization
Act of 2015 (TAARA 2015), which was enacted as Title IV of the
Trade Preferences Extension Act of 2015, Public Law No. 114-27,
section 405(a)(1)(A), the investigation into this petition was
reopened for a reconsideration investigation to apply the
requirements for worker group eligibility under chapter 2 of title
II of the Trade Act of 1974, as amended by the TAARA 2015, to the
facts of this petition (statutory reconsideration).
The initial investigation, initiated October 9, 2014, resulted
in a negative determination, issued on December 5, 2014 that was
based on no increased imports or shifts in production to a foreign
country being the cause of worker separations. Furthermore the
worker group did not qualify as a secondary worker. The workers’
firm is engaged in activities related to the production of tube
benders for the auto industry.
Based on information reviewed during the reconsideration
investigation, the Department of Labor determines that imports of
articles, shifts in production to a foreign country, or
acquisitions of articles from a foreign country did not contribute
importantly to worker separations. Furthermore, the worker group
did not qualify as a secondary worker and the firm was not affirmed
by the United States International Trade Commission in a final
determination of market injury, market disruption, or material
injury.
With respect to Section 222(a)(2)(A)(ii) of the Act, the
investigation revealed that company and customer imports of
articles like or directly competitive with the articles produced
by Metalfab Tool & Machine, Inc., Mio, Michigan have not
increased.
With respect to Section 222(a)(2)(B) of the Act, the
investigation revealed that the firm did not shift the production
of tube benders for the auto industry or a like or directly
competitive article to a foreign country or acquire tube benders
for the auto industry or a like or directly competitive article
from a foreign country.
With respect to Section 222(b)(2) of the Act, the
investigation revealed that Metalfab Tool & Machine, Inc., Mio,
Michigan is not a Supplier to a firm that employed a group of
workers who received a certification of eligibility under Section
222(a) of the Act, 19 U.S.C. § 2272(a).
With respect to Section 222(b)(2) of the Act, the
investigation revealed that Metalfab Tool & Machine, Inc., Mio,
Michigan does not act as a Downstream Producer to a firm that
employed a group of workers who received a certification of
eligibility under Section 222(a) of the Act, 19 U.S.C. § 2272(a).
Finally, the group eligibility requirements under Section
222(e) of the Act, have not been satisfied either because Criterion
(1) has not been met since the workers’ firm has not been publicly
identified by name by the International Trade Commission as a
member of a domestic industry in an investigation resulting in an
affirmative finding of serious injury, market disruption, or
material injury, or threat thereof.
Conclusion
After careful review, I determine that the requirements of
Section 222 of the Act, 19 U.S.C. § 2272, have not been met and,
therefore, deny the petition for group eligibility of Metalfab Tool
& Machine, Inc., Mio, Michigan, who were engaged in employment
related to the production of tube benders for the auto industry to
apply for adjustment assistance, in accordance with Section 223 of
the Act, 19 U.S.C. § 2273.
Signed in Washington, D.C. this 29th day of January, 2016
/s/Hope D. Kinglock
______________________________
HOPE D. KINGLOCK
Certifying Officer, Office of
Trade Adjustment Assistance
DEPARTMENT OF LABOR
Employment and Training Administration
TA-W-85,583
METALFAB TOOL & MACHINE, INC.
MIO, MICHIGAN
Negative Determinations Regarding Eligibility
To Apply for Worker Adjustment Assistance
And Alternative Trade Adjustment Assistance
In accordance with Section 223 of the Trade Act of 1974, as
amended ("Act"), 19 U.S.C. § 2273, the Department of Labor
herein presents the results of an investigation regarding
certification of eligibility to apply for worker adjustment
assistance.
Workers of a firm may be eligible for worker adjustment
assistance if they satisfy the criteria of subsection (a) and
(b) of Section 222 of the Act, 19 U.S.C. § 2272(a) and (b). For
the Department of Labor to issue a certification for workers
under Section 222(a) of the Act, 19 U.S.C. § 2272(a), the
following three criteria must be met:
(1) The first criterion (set forth in Section 222(a)(1) of the
Act, 19 U.S.C. § 2272(a)(1)) requires that a significant
number or proportion of the workers in such workers' firm,
or an appropriate subdivision of the firm, have become
totally or partially separated, or are threatened to become
totally or partially separated
(2) The second criterion (set forth in Section 222(a)(2) of the
Act, 19 U.S.C. § 2272(a)(2)) may be satisfied in one of two
ways:
(A) Increased Imports Path:
(i) sales or production, or both, at the workers' firm
must have decreased absolutely, AND
(ii) imports of articles like or directly competitive with
articles produced by such firm or subdivision have
increased; and
(iii) the increase described in clause (ii) contributed
importantly to such workers' separation or threat of
separation and to the decline in the sales or
production of such firm or subdivision.
(B) Shift in Production Path:
(i) there has been a shift in production by such workers'
firm or subdivision to a foreign country of articles
like or directly competitive with articles which are
produced by such firm or subdivision; and
(ii)(I) the country to which the workers' firm has
shifted production of the articles is a party to a
free trade agreement with the United States;
(II)the country to which the workers' firm has
shifted production of the articles is a beneficiary
country under the Andean Trade Preference Act, African
Growth and Opportunity Act, or the Caribbean Basin
Economic Recovery Act; or
(III)there has been or is likely to be an increase
in imports of articles that are like or directly
competitive with articles which are or were produced
by such firm or subdivision.
For the Department to issue a secondary worker
certification under Section 222(b) of the Act, 19 U.S.C. §
2272(b), to workers of a Supplier or a Downstream Producer, the
following criteria must be met:
(1) a significant number or proportion of the workers in
the workers' firm or an appropriate subdivision of the
firm have become totally or partially separated, or
are threatened to become totally or partially
separated;
(2) the workers' firm is a Supplier or Downstream Producer
to a firm that employed a group of workers who
received a certification of eligibility under Section
222(a) of the Act, 19 U.S.C. § 2272(a), and such
supply or production is related to the article that
was the basis for such certification; and
(3) either
(A) the workers' firm is a supplier and the component
parts it supplied to the firm described in paragraph
(2) accounted for at least 20 percent of the
production or sales of the workers' firm; or
(B) a loss of business by the workers' firm with the firm
described in paragraph (2) contributed importantly to
the workers' separation or threat of separation.
Section 222(c) of the Act, 19 U.S.C. § 2272(c), defines the
terms "Supplier" and "Downstream Producer."
The investigation was initiated in response to a petition
filed on October 9, 2014 by an American Job Center on behalf of
workers of Metalfab Tool & Machine, Inc., Mio, Michigan. The
workers' firm is engaged in activities related to the production
of tube benders for the automotive industry.
The petitioner alleged that the firm lost business to a
foreign competitor.
During the course of the investigation, information was
collected from the workers' firm and major declining customer.
With respect to Section 222(a)(2)(A)(ii) of the Act,
the investigation revealed that imports of articles like or
directly competitive with the articles produced by Metalfab
have not increased. A survey was conducted of Metalfab's major
declining domestic customer regarding the purchases of tube
benders and like or directly competitive articles in 2012,
2013, during the period of January through September 2014.
The survey revealed no import purchases of tube benders or
like or directly competitive articles during the relevant
period.
With respect to Section 222(a)(2)(B) of the Act, the
investigation revealed that the subject firm did not shift
production of tube benders to a foreign country.
With respect to Section 222(b)(2) of the Act, the
investigation revealed that Metalfab is not a Supplier or
Downstream Producer to a firm that employed a group of workers
who received a certification of eligibility under Section 222(a)
of the Act, 19 U.S.C. § 2272(a).
In order for the Department to issue a certification of
eligibility to apply for alternative trade adjustment assistance
(ATAA), the worker group must be certified eligible to apply for
trade adjustment assistance. Since the workers are denied
eligibility to apply for TAA, the workers cannot be certified
eligible for ATAA.
Conclusion
After careful review of the facts obtained in the
investigation, I determine that all workers of Metalfab Tool &
Machine, Inc., Mio, Michigan engaged in activities related to
the production of tube benders are denied eligibility to apply
for adjustment assistance under Section 223 of the Trade Act of
1974, as amended, and are also denied eligibility to apply for
alternative trade adjustment assistance under Section 246 of the
Trade Act of 1974, amended.
Signed in Washington, D.C. this 5th day of December, 2014
/s/Michael W. Jaffe
______________________________
MICHAEL W. JAFFE
Certifying Officer, Office of
Trade Adjustment Assistance