DEPARTMENT OF LABOR

Employment and Training Administration

TA-W-82,799

GENERAL DYNAMICS ARMAMENT & TECHNICAL PRODUCTS, INC.
SACO, MAINE

Negative Determination Regarding Eligibility
To Apply for Worker Adjustment Assistance

In accordance with Section 223 of the Trade Act of 1974, as
amended ("Act"), 19 U.S.C. § 2273, the Department of Labor herein
presents the results of an investigation regarding certification
of eligibility to apply for worker adjustment assistance.
Workers of a firm may be eligible for worker adjustment
assistance if they satisfy the criteria of subsection (a), (b) or
(e) of Section 222 of the Act, 19 U.S.C. § 2272(a), (b) and (e).
For the Department of Labor to issue a certification for workers
under Section 222(a) of the Act, 19 U.S.C. § 2272(a), the
following three criteria must be met:
(1) The first criterion (set forth in Section 222(a)(1) of the
Act, 19 U.S.C. § 2282(a)(1)) requires that a significant
number or proportion of the workers in the workers' firm must
have become totally or partially separated or be threatened
with total or partial separation.

(2) The second criterion (set forth in Section 222(a)(2) of the
Act, 19 U.S.C. § 2272(a)(2)) may be satisfied in one of two
ways:
(A) Increased Imports Path:
(i) sales or production, or both, at the workers' firm must
have decreased absolutely, AND
(ii) (I) imports of articles or services like or directly
competitive with articles or services produced or
supplied by the workers' firm have increased, OR
(II)(aa) imports of articles like or directly
competitive with articles into which the component
part produced by the workers' firm was directly
incorporated have increased; OR
(II)(bb) imports of articles like or directly
competitive with articles which are produced
directly using the services supplied by the
workers' firm have increased; OR
(III) imports of articles directly incorporating
component parts not produced in the U.S. that are
like or directly competitive with the article into
which the component part produced by the workers'
firm was directly incorporated have increased.
(iii) the increase in imports described in clause (ii)
contributed importantly to such workers' separation or
threat of separation and to the decline in the sales or
production of such firm.

(B) Shift in Production or Supply Path:
(i)(I) there has been a shift by the workers' firm to a
foreign country in the production of articles or supply
of services like or directly competitive with those
produced/supplied by the workers' firm; OR
(II) there has been an acquisition from a foreign
country by the workers' firm of articles/services that
are like or directly competitive with those
produced/supplied by the workers' firm; and
(ii) the shift described in clause (i)(I) or the acquisition
of articles or services described in clause (i)(II)
contributed importantly to such workers' separation or
threat of separation.

Section 222(c) of the Act, 19 U.S.C. § 2272(c), defines the
terms "Supplier" and "Downstream Producer." For the Department to
issue a secondary worker certification under Section 222(b) of the
Act, 19 U.S.C. § 2272(b), to workers of a Supplier or a Downstream
Producer, the following criteria must be met:
(1) a significant number or proportion of the workers in the
workers' firm or an appropriate subdivision of the firm
have become totally or partially separated, or are
threatened to become totally or partially separated;

(2) the workers' firm is a Supplier or Downstream Producer
to a firm that employed a group of workers who received
a certification of eligibility under Section 222(a) of
the Act, 19 U.S.C. § 2272(a), and such supply or
production is related to the article or service that was
the basis for such certification; and

(3) either
(A) the workers' firm is a supplier and the component
parts it supplied to the firm described in paragraph (2)
accounted for at least 20 percent of the production or
sales of the workers' firm;
or
(B) a loss of business by the workers' firm with the
firm described in paragraph (2) contributed importantly
to the workers' separation or threat of separation.

Workers of a firm may also be considered eligible if they
are publicly identified by name by the International Trade
Commission (ITC) as a member of a domestic industry in an
investigation resulting in a category of determination that is
listed in Section 222(e) of the Act, 19 U.S.C. § 2272(e).
The group eligibility requirements for workers of a firm
under Section 222(e) of the Act, 19 U.S.C. § 2272(e), can be
satisfied if the following criteria are met:
(1) the workers' firm is publicly identified by name by the
International Trade Commission as a member of a domestic
industry in an investigation resulting in--
(A) an affirmative determination of serious injury or
threat thereof under section 202(b)(1);
(B) an affirmative determination of market disruption
or threat thereof under section 421(b)(1); or
(C) an affirmative final determination of material
injury or threat thereof under section 705(b)(1)(A)
or 735(b)(1)(A) of the Tariff Act of 1930 (19
U.S.C. 1671d(b)(1)(A) and 1673d(b)(1)(A));

(2) the petition is filed during the 1-year period beginning
on the date on which--
(A) a summary of the report submitted to the President
by the International Trade Commission under section
202(f)(1) with respect to the affirmative
determination described in paragraph (1)(A) is
published in the Federal Register under section
202(f)(3); or
(B) notice of an affirmative determination described in
subparagraph (1) is published in the Federal
Register; and

(3) the workers have become totally or partially
separated from the workers' firm within--
(A) the 1-year period described in paragraph (2); or
(B) notwithstanding section 223(b)(1), the 1-year
period preceding the 1-year period described in
paragraph (2).

The investigation was initiated in response to a petition
filed on June 11, 2013 on behalf of workers of General Dynamics
Armament & Technical Products, Inc., Saco, Maine (hereafter
"General Dynamics" or "subject firm"). The workers' firm is
engaged in activities related to the production of crew served
weapons, spare barrels, and multi-barreled Gatling guns. The
workers are not separately identifiable by article produced. The
worker group does not include on-site leased workers.
The petitioner alleged that the contract for the building of
MK19 40MM Grenade launchers was awarded to another company,
Fabrique National (FN Manufacturing) and that FN Manufacturing is
located in Columbia, South Carolina. The petitioner also alleged
that FN Manufacturing is a subsidiary of Belgian Herstal Group,
located in Herstal Belgium in Europe.
During the course of the investigation, information was
collected from the workers' firm and the customers of the
workers' firm.
With respect to Section 222(a)(2)(A)(ii) of the Act, the
investigation revealed that the subject firm did not import,
during the relevant period, crew served weapons, spare barrels,
and multi-barreled Gatling guns, or like or directly competitive
articles. The Department also conducted a customer bid survey
which revealed that the lost bid was awarded to a firm located in
the U.S. Further, the investigation revealed that the articles
produced by the subject firm are subject to the Buy America Act.
Hence, the crew served weapons, spare barrels, and multi-barreled
Gatling guns are required to be produced in the United States.
With respect to Section 222(a)(2)(B) of the Act, the
investigation revealed that the subject firm did not shift
production of crew served weapons, spare barrels, and multi-
barreled Gatling guns, or like or directly competitive articles,
to a foreign country or acquire such production from a foreign
country.
With respect to Section 222(b)(2) of the Act, the
investigation revealed that General Dynamics is not a Supplier to
a firm that employed a group of workers who received a
certification of eligibility under Section 222(a) of the Act, 19
U.S.C. § 2272(a).
With respect to Section 222(b)(2) of the Act, the
investigation revealed that General Dynamics does not act as a
Downstream Producer to a firm that employed a group of workers
who received a certification of eligibility under Section 222(a)
of the Act, 19 U.S.C. § 2272(a).
Finally, the group eligibility requirements under Section
222(e) of the Act, have not been satisfied since the workers' firm
has not been publicly identified by name by the ITC as a member of
a domestic industry in an investigation resulting in an
affirmative finding of serious injury, market disruption, or
material injury, or threat thereof.
Conclusion
After careful review of the facts obtained in the
investigation, I determine that the requirements of Section 222 of
the Act, 19 U.S.C. § 2272, have not been met and, therefore, deny
the petition for group eligibility of General Dynamics Armament &
Technical Products, Inc., Saco, Maine, to apply for adjustment
assistance, in accordance with Section 223 of the Act, 19 U.S.C. §
2273.
Signed in Washington, D.C. this 2nd day of August, 2013

/s/ Del Min Amy Chen

______________________________
DEL MIN AMY CHEN
Certifying Officer, Office of
Trade Adjustment Assistance