February 11, 2015

OSHA News Brief: Pork-processing facility cited for exposing workers to corrosive chemical [02/11/2015]

Employer name: Seaboard Foods LLC

Inspection site: Guymon, Oklahoma

February 10, 2015

OSHA News Release: OSHA cites Saia Motor Freight Line after explosion injures 4 in St. Louis [02/10/2015]

ST. LOUIS — Four employees were hospitalized, two of them critically injured, after an explosion at a St. Louis trucking terminal on Aug. 6, 2014. The explosion's cause: a forklift's ignition source and a loose coupling connection to a liquid propane gas tank. An investigation of the incident by the U.S. Department of Labor's Occupational Safety and Health Administration found one willful and 11 serious safety and health violations at Saia Motor Freight Line LLC. As a result, the agency has proposed penalties of $119,000.

February 10, 2015

OSHA News Release: Formed Fiber Technologies in Auburn, Maine, exposes employees to lacerations, amputation and other hazards [02/10/2015]

Textile manufacturer faces $108,800 in OSHA penalties

AUGUSTA, Maine — Employees at Formed Fiber Technologies LLC's Auburn manufacturing plant use a variety of machines, including robots, to make polyester carpets and thermoformed trunk liners for the automotive industry. An inspection by U.S. Department of Labor's Occupational Safety and Health Administration begun in September 2014, has found these workers at risk of injuries because their employer did not ensure proper safeguards on the machines they operate.

February 9, 2015

OSHA News Release: Reynolds Nationwide exposes workers to dangerous fumes in food transport tankers at London, Ohio, facility [02/09/2015]

LONDON, Ohio — Employees at Reynolds Nationwide risked potentially lethal suffocation caused by dangerous fumes as the company did not test the atmosphere and properly ventilate the air in food transport tankers before allowing workers to enter. After receiving an employee complaint, the U.S. Department of Labor's Occupational Safety and Health Administration initiated an investigation on Aug. 6, 2014, at the London tank-cleaning facility.

February 5, 2015

OSHA News Release: Animal feed producer exposes workers to potential dust explosion and other hazards [02/05/2015]

HOUSTONCombustible dust left uncontrolled or suspended in the air can explode, which was one of many safety hazards discovered after an inspection at the Thomas Moore Feed facility in Navasota, Texas, by the U.S. Department of Labor's Occupational Safety and Health Administration. OSHA inspectors found 18 violations and proposed a penalty of $58,100.

February 5, 2015

OSHA News Brief: MP Global Products LLC exposes workers to fire, amputation hazards [02/05/2015]

Employer name: MP Global Products LLC, Norfolk, Nebraska

Investigation site: 2500 Hadar Road, Norfolk, Nebraska

After receiving a formal complaint from an employee alleging unsafe working conditions, the U.S. Department of Labor's Occupational Safety and Health Administration's Omaha Area Office initiated an inspection on Aug. 5, 2014.

Investigation findings: OSHA's investigation found multiple safety and health hazards at the company which manufactures padding from recycled denim products.

February 5, 2015

OSHA News Release: Explosion at Madden Bolt steel manufacturer kills worker [02/05/2015]

HOUSTON — A 31-year-old worker was the second person killed in a year at Madden Bolt Corp. when a cutting-table explosion in August 2014 hurled the employee and a steel plate into the air. The plate then landed on the fallen worker, U.S. Department of Labor Occupational Safety and Health Administration investigators determined. As a result, OSHA has cited the Houston-based employer for 10 serious violations.

In September 2013, a forklift driver at Madden Bolt died after the machine turned over and pinned him underneath.

February 4, 2015

OSHA News Release: OSHA cites BRT Extrusion after worker was crushed to death [02/04/2015]

NILES, Ohio. — A 49-year-old machine operator was fatally crushed while reaching into an extrusion press to remove unprocessed aluminum parts because his employer, BRT Extrusions Inc., failed to ensure the machine's power was fully off so that it would not turn on during maintenance, a procedure known as lockout/tagout. An investigation into the Aug. 6, 2014, incident by the U.S.

February 4, 2015

OSHA News Release: OSHA cites International Paper Co. after worker suffers severe electrical shock [02/04/2015]

MADISON, Ohio — Every year, thousands of people are electrocuted at work by current from live wires and energized parts. Electrical current often enters through the skin, muscles or hair and then spikes through the nervous system, burning tissue in patches. One of those who suffered this kind of injury was a 24-year-old temporary maintenance employee at International Paper Co. in Madison. Burns hospitalized him and left him unable to work for more than four months.

February 4, 2015

OSHA News Release: Garda Armored Car fails to train drivers on fire extinguisher use [02/04/2015]

ST. LOUIS — Garda Armored Car failed to train its employees to use portable fire extinguishers, despite being cited by the U.S. Department of Labor's Occupational Safety and Health Administration for the same violation in March 2013. Responding to a complaint, OSHA inspected the armored car company on Oct. 20, 2014, and found that the business had not trained employees as instructed.

February 4, 2015

OSHA News Release: Lead paint exposure endangers workers on Blue Island bridge project [02/04/2015]

BLUE ISLAND, Ill. — Without proper protections, employees who work with lead can bring this toxic metal home on their clothes, shoes, skin, hair and hands with the potential to poison children and other family members. "Take-home lead" as it's called is particularly dangerous for pregnant women and preschoolers.

February 4, 2015

OSHA News Release: For the 4th time in a year, OSHA cites Burrows Paper [02/04/2015]

FRANKLIN, Ohio — Mere months after two employees were injured by dangerous machines, Burrows Paper Corp. again put workers at risk. Acting on a complaint, the U.S. Department of Labor's Occupational Safety and Health Administration found workers unjamming and servicing machines without proper safeguards during an Aug. 25, 2014, inspection. This is the fourth time in the past year that Burrows has been cited for hazards at its Franklin food box manufacturing facility.

February 3, 2015

OSHA News Release: Plating shop exposes workers to serious cancer risk; other health hazards [02/03/2015]

DALLAS — The dangers of worker exposure to hexavalent chromium, a known carcinogen that can cause serious long-term health issues, including lung cancer and kidney failure, should have come as no surprise to the Lane Plating Works Inc. owner. Air-monitoring tests told him that workers were being overexposed to the dangerous toxin, but he failed to correct the hazard. As a result, the U.S. Department of Labor's Occupational Safety and Health Administration has cited the Dallas-based chrome plating shop for two willful violations and 19 serious violations.

February 3, 2015

OSHA News Release: Auto parts manufacturer and temp agency expose workers to electrocution, serious falls and other hazards [02/03/2015]

SCA Inc. plant in Auburn, Alabama, where workers were exposed to several safety hazards.

SCA Inc. plant in Auburn, Alabama, where workers were exposed to several safety hazards.

February 3, 2015

OSHA News Brief: H & W Contracting exposes workers to dangerous trench cave-in hazards [02/03/2015]

Employer name: H & W Contracting, Sioux Falls, South Dakota

Investigation site: Columbia and East Willow Streets, Harrisburg, South Dakota

On July 28, 2014, the U.S. Department of Labor's Occupational Safety and Health Administration's Bismarck Area Office initiated an inspection under the National Emphasis Program on Trenching after witnessing workers exposed to trenching hazards.

February 3, 2015

OSHA News Brief: Flink Co. exposes workers to hexavalent chromium while cutting stainless steel [02/03/2015]

Employer name: Flink Co., 502 N. Vermillion St., Streator, Illinois

Inspection site: 150 Benchmark Drive, Streator, Illinois

On July 23, 2014, an inspection was initiated by the North Aurora Area Office of the U.S. Department of Labor's Occupational Safety and Health Administration after receiving a complaint.

February 2, 2015

OSHA News Release: Ashley Furniture faces $1.76M in fines after OSHA finds more than 1,000 worker injuries at Wisconsin site in past 36 months [02/02/2015]

ARCADIA, Wis. — In a three-and-a-half year period, 4,500 employees at Ashley Furniture Industries Inc., in Arcadia, experienced more than 1,000 work-related injuries. One worker became another terrible statistic when he lost three fingers in July 2014 while operating a dangerous woodworking machine without required safety mechanisms in place. Of the injuries recorded, more than 100 were caused by similar machinery.

February 2, 2015

OSHA News Brief: Aircraft maintenance workers exposed to hazardous chemicals [02/02/2015]

Employer name: Northrop Grumman Corp.

Inspection site: Lake Charles, La.

Date inspection initiated and what prompted the inspection: The inspection began August 2014 as the result of a complaint, but was expanded to also address the Occupational Safety and Health Administration's National Emphasis Program for Hexavalent Chromium.

February 2, 2015

OSHA News Release: Ashley Furniture faces $1.76M in fines after OSHA finds more than 1,000 worker injuries at Wisconsin site in past 36 months [02/02/2015]

ARCADIA, Wis. — In a three-and-a-half year period, 4,500 employees at Ashley Furniture Industries Inc., in Arcadia, experienced more than 1,000 work-related injuries. One worker became another terrible statistic when he lost three fingers in July 2014 while operating a dangerous woodworking machine without required safety mechanisms in place. Of the injuries recorded, more than 100 were caused by similar machinery.